VX CLIP adapter

The Yaesu VX-5R is a great little radio but lets face it, the factory belt clip is pathetic. After many years of using handheld radios I learned the hard way that one should always protect their investment by purchasing a protective leather case. On the VX-5 this presents a special problem when trying to replace the belt clip with a good one. The case straps close around the top of the radio where the clip screws onto the unit. This makes using an aftermarket clip and the protective case at the same time very difficult. The VX CLIP adapter solves this problem.

After some research and experimentation I designed a heavy duty aircraft aluminum offset clip adapter that allows one to use an off the shelf universal "quick draw" spring belt clip ($4.95 at your local Wal-Mart) with the VX-5 tucked safely inside the CSC-73 leather case. My friends who saw the adapter wanted me to make them one too so I decided to take a chance and had a local machine shop manufacture a batch run so I could make them available on the web. My goal was to produce a very high quality product at low cost so any good Ham could afford it and be able to protect and enjoy their fine little radio. The pictures on this page show the details of the design and the adapter in use on the radio. Please take a look and read the descriptions to learn more about the VX CLIP.

The VX-CLIP adapter allows the Belkin universal belt clip to be used with the protective Yaesu CSC-73 leather case.
The adapter can be used with or without the wrist strap. It has a groove which allows the strap to be attached.

This belt clip system works better than any other I have ever owned. It stands off your belt just enough that it rides well and doesn't dig into your side or get put under a lot of pressure when you sit and the antenna is in free air, not pressed against your body. The ability to easily rotate the radio when you are sitting or reaching in your pocket is a real plus. The 8 detent positions make the whole assembly work very professionally. Since I started using the VX-CLIP adapter with the Belkin belt clip I have not had the radio pop off my belt, come out of the clip, or even come close to losing it. I never felt safe with the original clip. The quick release makes drawing the radio to talk very easy, there is no struggling to get a spring clip out from under your belt. The radio is super secure but easy to access! The adapter and Belkin clip together only costs 15 bucks and works better than other solutions costing twice as much!

Ordering Information:

What's included: The VX CLIP package includes the aluminum clip adapter with spring steel pins installed. One small "star" washer for use with the original Yaesu belt clip screw and one self tapping screw for affixing the universal clip button. The adapter is bare, paintable aluminum.

What's not included: The Belkin Swivel Belt Clip is not included. You can buy one at your local Wal-Mart for less than 5 bucks so why pay me and the USPS to ship you one? The VX CLIP adapter was designed for use with the Belkin E series or similar belt clips.

Shipping: The VX CLIP is small and light. It will be mailed to you in flat envelope wrapped in the instruction sheet. Postage is free to the USA ONLY. Overseas purchasers please use the Overseas shipping button below. Additional shipping will be added to overseas orders.

Warranty / Disclaimer: The VX CLIP adapter is precision made of high quality materials and will be packaged and shipped with care. There is no other warranty either expressed or implied. MRE Software LLC will not be responsible for any costs, libablities, or damages caused by installing or using this product. The VX CLIP adapter has not been approved by, or in any way endorsed by Yaesu Muesen Co. / Vertex Standard Inc. USE AT YOUR OWN RISK.

PayPal Payment: The PayPal buttons below will take you to a secure order form at PayPal. If you don't have a PayPal account you may use any major credit card. The payment will be to MRE Software LLC which is my business account. I will ship on the next business day.

Mail Order: If you don't have PayPal, a credit card, or simply prefer mail order, I have prepared an order form you can print from your browser and send with a Money Order Only Please, no personal checks or telephone orders. Click HERE to go to the mail order form.

PayPal or Credit Card purchasers please use these buttons.

The VX-CLIP may also fit the VR-120 receiver. It has not been tested on this unit. If someone will email me and let me know for sure I would appreciate it!

I have posted some information on the Belkin "E" series universal clip here.

The VX CLIP adapter is easy to install! View the instructions. (Adobe PDF)

Check me out before you buy...
Name: Emery Wooten
Callsign: KC5LIO - QRZ Lookup
eBay feedback: kc5lio
Business website: www.mresoftware.com
Club website: www.claycars.org
Email: mre@mresoftware.com